An immunoassay for metolachlor detection in river water and soil.

An indirect enzyme-linked immunosorbent assay (EIA) for metolachlor (2-chloro-N-(2-ethyl-6-methylphenyl)-N-(2-methoxy-1-methylethyl)acetamid e) detection in river water and soil was developed using serum obtained from rabbits immunized against the acid of metalaxyl ((N-(2,6-dimethylphenyl)-N-(methoxy-acetyl)-DL-alanine methyl ester) conjugated to bovine serum albumin. The assay had a linear working range from 1 to 50 ng/ml with a mean I50 value of 13.6 ng/ml and a lower detection limit of 2.0 ng/ml. Both the mean interwell and interassay coefficients of variation were less than 4% over the range of the standard curves for samples which had been prepared in phosphate buffered saline (PBS), river water, or soil extract. Assay cross-reactivity to the following four structurally related chloro-acetanilide pesticides were: propachlor (0%), metazachlor (0%), alachlor (23%), and metalaxyl (5,000%). Mean recoveries of metolachlor in spiked (2.0 to 32.0 ng/ml range) PBS, river water, and soil extract were 102%, 103%, and 110%, respectively. Soil samples were taken over a 56-d period from field plots treated with metolachlor and analyzed by GC and EIA. The correlation coefficient for comparison of the two methods was 0.96 with the slope of the linear regression line being 0.78. Furthermore, no statistical difference (P less than 0.05) was found between the dissipation curves of metolachlor derived from GC data versus EIA data.     

Application of slipstreamed air pollution control devices on waste-as-fuel processes

The recovery of energy from the combustion of municipal solid wastes is becoming an attractive alternative as landfill space becomes scarce and the availability of fossil fuels decreases. Particulate emissions from “waste-as-fuel” processes, however, may differ significantly in chemical and physical properties from particulate emissions produced by firing only coal. Such differences can affect the design and operation of air pollution control equipment. Presented in this paper are the results of a 2-month test program at Ames, Iowa, with a mobile electrostatic precipitator (ESP) and a mobile scrubber supplied by the U.S. Environmental Protection Agency (EPA), Industrial Environmental Research Laboratory (IERL), Research Triangle Park. PEDCo Environmental, Inc., and Acurex Corporation jointly conducted the test program to examine the effect of burning refuse-derived fuel (RDF) on particulate and heavy metal control efficiencies. The mobile ESP was used only as a primary control device, whereas the mobile scrubber was tested both upstream and downstream of the existing full-scale ESP. This paper also presents a status report on a PEDCo test program with a pilot fabric filter at Ames.     

Neue Reaktor-Technologien

It is doubtful that large-scale industrial utilization of the fast breeding reactor will ever be possible. It is, however, probable that the thorium reactor, for which three plans already exist, will be realized. There is enough thorium to supply thorium reactors up to the next glacial period.     

Genetic connectivity among color morphs and Pacific archipelagos for the flame angelfish, <Emphasis Type="Italic">Centropyge loriculus</Emphasis>

Color variation is used in taxonomic classification of reef fishes, but it may not reliably indicate evolutionary divergence. In the central Pacific, there are three color morphs of the flame angelfish, Centropyge loriculus: a red morph that occurs primarily in the Hawaiian archipelago, the endemic Marquesan color morph with reduced black markings, and an orange morph that occurs throughout the rest of Oceania. The red and orange morphs co-occur at Johnston Atoll (1,300 km south of Hawai’i), but intermediate forms have not been reported. To determine whether the three color morphs represent distinct evolutionary lineages, we compared 641 base pairs of mitochondrial cytochrome b. Forty-one closely related haplotypes were observed in 116 individuals. Analysis of molecular variance (AMOVA) indicated no significant genetic structure among color morphs (Φ_ST = 0.011, P = 0.147). Likewise, there was no significant pairwise structure between sampling locations, separated by up to 5,700 km, after a Bonferroni correction (Φ_ST = 0.000–0.080, P = 0.0130–0.999). Genetic studies in conjunction with larval distribution data indicate that Centropyge species are highly dispersive. While there is a strong geographic component to the distribution of color morphs in C. loriculus, we find no evidence for corresponding genetic partitioning. We do not rule out an adaptive role for color differentiation, but our data do not support emerging species.     

Comparison of nitrification rates in conventional and membrane-assisted biological nutrient removal processes

A membrane-assisted and a conventional activated sludge system, both operated in an enhanced biological phosphorus removal (EBPR) mode and under identical operating conditions, were studied to investigate the effect of the membrane solids-liquid separation on nitrification activity. Both the membrane EBPR (MEBPR) and conventional EBPR (CEBPR) processes achieved stable and complete removal of ammonium-nitrogen from the influent wastewater. However, when the intrinsic nitrification activity was assessed in offline batch tests, the CEBPR mixed liquor exhibited 15 to 75% greater nitrification potential than the MEBPR counterpart. These results were further validated by monitoring nitrification rates of conventional mixed liquor as it evolved toward a membrane mixed liquor. It was also demonstrated that the larger aerobic mass fraction of the MEBPR system could not be the only factor influencing the reduced intrinsic nitrification rate. The present study strongly suggests that the presence of a membrane solids-liquid separation per se may be sufficient to alter the nitrification kinetics of an EBPR mixed liquor and that this possibility should be considered in arriving at an appropriate process design.     

Efficiency of energy delivery systems: II. Estimating energy costs of capital equipment

Procedures are developed and summarized that allow the calculation of the energy required to manufacture and install capital equipment, such as the material needed for a coalfired power plant. Three methods are available, each with certain strengths and weaknessess The first uses both literature value and national manufacturing statistics, the second uses a previously developed technique that disaggregates energy use according to how much each industry buys from all other industries, and the third technique is based on the average national relation between energy use and dollar flow. The most important differences between estimates of energy use by the different techniques relates to the inclusion or exclusion of labor and indirect expenditures rather than to differences in the data bases of the three techniques.     

Factors controlling measurements of radon mass exhalation rate

Radon mass exhalation rate of soil samples was measured using an exhalation chamber of 10 dm(3) volume and a Lucas cell. The results show that mass of sample, grain size and water content influence the radon mass exhalation rate. For soil of (226)Ra activity concentration about 2500 Bq kg(-1) and samples within the range from 0.20 kg to 0.50 kg, the radon mass exhalation rate values are higher than those for samples of other masses. The observed radon exhalation rate is an inverse function of the average grain size. At the water content about 6% by weight, the radon mass exhalation rate reaches maximum, then it decreases with both increasing and decreasing of the water content in the sample.     

The prediction of safe lifting behavior: an application of the theory of planned behavior

PROBLEM: Injuries resulting from lifting are costly, and create significant pain and discomfort. While engineering controls are the most effective means of reducing risks, most organizations continue to rely on manual lifting techniques. The problem, however, is that the use of safe-lifting techniques is inconsistent and managers have a difficult time motivating use of these techniques. Consequently, it is important to understand the factors driving safe-lifting behaviors. METHODS: This study used a survey to apply the theory of planned behavior (Ajzen., I., 1991. The theory of planned behavior. Organization Behavior and Human Processes, 50, 179-211) to safe-lifting among 136 materials management employees at a heavy manufacturing organization. Structural equation modeling and factor analysis were employed to analyze relationships among constructs. RESULTS: Results revealed that perceived behavioral control and intention were the strongest predictors of safe-lifting behavior. Subjective norms, to a lesser degree, were also important influences on intention. Attitudes did not surface as effective direct predictors of safe-lifting behavior, but did affect behavior and intent via mediating factors (subjective norms and perceived behavioral control). Finally, the theory of planned behavior was supported as an effective model explaining safe-lifting behavior, and had potential application for many other safety-related behaviors. IMPACT ON INDUSTRY: Results from this study emphasize the importance of perceived behavioral control as a factor associated with safety-related behavior.